peter sagan´s cannondale /sramXX1

Le Tour de France 2012.News Feed powered by Skoda

Pro bike: Peter Sagan's Cannondale SuperSix EVO Hi-Mod

By James Huang in Visé, Belgium | Tuesday, Jul 3, 2012 10.00am

Cannondale provided Slovakian superstar Peter Sagan (Liquigas-Cannondale) with this specially painted SuperSix Evo Hi-Mod after winning Stage 1 Traditional-bend aluminum FSA handlebars for stage 1 winner Peter Sagan (Liquigas-Cannondale) Peter Sagan's (Liquigas-Cannondale) special SuperSix Evo Hi-Mod was painted by Artech

New SRAM Red linkage-enhanced single-pivot brake calipers for Peter Sagan (Liquigas-Cannondale). Peter Sagan (Liquigas-Cannondale) is using a Cannondale Hollowgram Si SL crankset fitted with previous-generation SRAM Red chainrings. There's a previous-generation SRAM Red front derailleur, too, but that's matched with the clever chain keeper borrowed from the new Red group.

Metallic 'Evo' logos are added to the flattened chain stays on Peter Sagan's (Liquigas-Cannondale) Cannondale SuperSix Evo Hi-Mod This menacing 'Tourminator' head will certainly make for interesting finish line photos. Metallic silver and electric green logos decorate Peter Sagan's (Liquigas-Cannondale) special Cannondale SuperSix Evo Hi-Mod at the start of Stage 2

New SRAM Red DoubleTap levers are covered with team-edition neon green hoods on Peter Sagan's (Liquigas-Cannondale) special Cannondale SuperSix Evo Hi-Mod. Peter Sagan (Liquigas-Cannondale) used to be known as the 'Terminator' but now he's the 'Tourminator'. Ultralight Speedplay Zero Nanogram pedals for Slovakian star Peter Sagan (Liquigas-Cannondale)

The rear end of Peter Sagan's (Liquigas-Cannondale) Cannondale SuperSix Evo Hi-Mod features a new SRAM Red rear derailleur, a SRAM PG-1070 cassette, and Gore Ride-On Professional System sealed cables. The sandwich-type replaceable rear derailleur hanger on Peter Sagan's (Liquigas-Cannondale) bike is supposedly stiffer than one that attached to only one side. Little rubber o-rings around the housing are intended to prevent paint damage

Flattened chain stays and slim seat stays are designed to provide some comfort on Peter Sagan's (Liquigas-Cannondale) special Cannondale SuperSix Evo Hi-Mod The seat tube is noticeably flattened down by the bottom bracket and is capped off by a conventional 27.2mm-diameter FSA K-Force carbon fiber seatpost The rear of the top tube is flattened as well but in this case, it's more a function of maintaining fiber paths on the way to the seat stays Cannondale staffers made a bet with Slovakian superstar Peter Sagan (Liquigas-Cannondale) just prior to the final stage of this year's Tour of California: win a fifth stage (he had already won four) and he'd get a specially painted bike for the Tour de France.

Well, Sagan delivered on his end of the bargain (and then went onto win the first stage of the Tour de France), and so did Cannondale, with a custom SuperSix EVO Hi-Mod.

Sagan's 'Terminator' nickname has morphed into 'Tourminator' for July and Artech Design near Bologna, Italy went all-out on the theme, painting a menacing visage from the famous film on the head tube and covering the frame with a bold black, metallic silver and neon green livery. The team proudly put it out on its own before the start of Stage 2 and in no time at all there was a sizeable crowd.

It's not just the paint that makes Sagan's bike special, though. Cannondale provides him with a custom geometry (shared with teammate Daniele Bennati, thankfully) that pairs a long 58cm top tube with the rear end of a 54cm frame. The build kit is fairly standard, though, comprising a nearly complete SRAM Red group (omissions include a previous-generation Red front derailleur and Cannondale's own Hollowgram Si SL crankset), Mavic Cosmic Carbone Ultimate wheels, Speedplay Zero Nanogram pedals, a fi'zi:k Aliante saddle, FSA cockpit components, and Gore Ride-On Professional System derailleur cables and housing

We weren't able to obtain an actual weight but considering the Liquigas-Cannondale team has previously had to fit a custom hollow steel bottom bracket spindle to meet the minimum UCI guidelines, 6.8kg (14.99lb) is a reasonably safe assumption.

Pro bike: Peter Sagan's Cannondale SuperSix EVO Hi-Mod.By James Huang in Visé, Belgium | Tuesday, Jul 3, 2012 10.00am

Cannondale provided Slovakian superstar Peter Sagan (Liquigas-Cannondale) with this specially painted SuperSix Evo Hi-Mod after winning Stage 1

Traditional-bend aluminum FSA handlebars for stage 1 winner Peter Sagan (Liquigas-Cannondale) Peter Sagan's (Liquigas-Cannondale) special SuperSix Evo Hi-Mod was painted by Artech New SRAM Red linkage-enhanced single-pivot brake calipers for Peter Sagan (Liquigas-Cannondale) Peter Sagan (Liquigas-Cannondale) is using a Cannondale Hollowgram Si SL crankset fitted with previous-generation SRAM Red chainrings. There's a previous-generation SRAM Red front derailleur, too, but that's matched with the clever chain keeper borrowed from the new Red group Metallic 'Evo' logos are added to the flattened chain stays on Peter Sagan's (Liquigas-Cannondale) Cannondale SuperSix Evo Hi-Mod This menacing 'Tourminator' head will certainly make for interesting finish line photos

Metallic silver and electric green logos decorate Peter Sagan's (Liquigas-Cannondale) special Cannondale SuperSix Evo Hi-Mod at the start of Stage 2

New SRAM Red DoubleTap levers are covered with team-edition neon green hoods on Peter Sagan's (Liquigas-Cannondale) special Cannondale SuperSix Evo Hi-Mod

Peter Sagan (Liquigas-Cannondale) used to be known as the 'Terminator' but now he's the 'Tourminator'

Ultralight Speedplay Zero Nanogram pedals for Slovakian star Peter Sagan (Liquigas-Cannondale)

The rear end of Peter Sagan's (Liquigas-Cannondale) Cannondale SuperSix Evo Hi-Mod features a new SRAM Red rear derailleur, a SRAM PG-1070 cassette, and Gore Ride-On Professional System sealed cables

The sandwich-type replaceable rear derailleur hanger on Peter Sagan's (Liquigas-Cannondale) bike is supposedly stiffer than one that attached to only one side. Little rubber o-rings around the housing are intended to prevent paint damage

Flattened chain stays and slim seat stays are designed to provide some comfort on Peter Sagan's (Liquigas-Cannondale) special Cannondale SuperSix Evo Hi-Mod

The seat tube is noticeably flattened down by the bottom bracket and is capped off by a conventional 27.2mm-diameter FSA K-Force carbon fiber seatpost

The rear of the top tube is flattened as well but in this case, it's more a function of maintaining fiber paths on the way to the seat stays

Cannondale staffers made a bet with Slovakian superstar Peter Sagan (Liquigas-Cannondale) just prior to the final stage of this year's Tour of California: win a fifth stage (he had already won four) and he'd get a specially painted bike for the Tour de France.

Well, Sagan delivered on his end of the bargain (and then went onto win the first stage of the Tour de France), and so did Cannondale, with a custom SuperSix EVO Hi-Mod.

Sagan's 'Terminator' nickname has morphed into 'Tourminator' for July and Artech Design near Bologna, Italy went all-out on the theme, painting a menacing visage from the famous film on the head tube and covering the frame with a bold black, metallic silver and neon green livery. The team proudly put it out on its own before the start of Stage 2 and in no time at all there was a sizeable crowd.

James Huang talks us through Peter Sagan's custom SuperSix Evo. It's got a mean custom paint job to fit his 'Tourminato' moniker.

BikeRadar http://www.bikeradar.com

.-.-.-.-.-.-.-.-

Pro Bike: Peter Sagan’s Cannondale SuperSix EVO

By Ben Delaney, from Santa Rosa, CA | Monday, May 14, 2012 10.00pm

Peter Sagan’s Cannondale SuperSix EVO Team features a lo-ong top tube (Ben Delaney/BikeRadar)

American chassis, Slovak engine

Liquigas-Cannondale are running SRAM Red 2012 components… for the most part

Steel is real. Here, Sagan has a 400g steel spindle to make his total bike weight race legal. Also, his SRAM Red derailleur has a SRAM Force steel cage branded Red

The SRAM Red 2012 rear brake functions smoothly, with internal-but-straight cable routing thanks to the SuperSix EVO’s wide top tube design

If the devil is in fact in the details, then the devil is not red but green

Mavic supply both wheels and rubber, specifically Cosmic Carbone Ultimate tubulars with Yksion GripLink tires

Like many pros, Sagan runs aluminum bars. His FSA Traditional Bend Alloy Energy measures 42cm, c-c

The long custom frame geometry allows for a relatively normal 120mm stem

Seat of power: Fi’zi:k’s

Slovak speedster Peter Sagan (Liquigas-Cannondale) won the first and second stages of the Amgen Tour of California aboard a Cannondale SuperSix EVO Team with custom geometry.

Although the expense of carbon molds has made custom geometry cost-prohibitive for some companies, Cannondale had created a “54x58” mold for former Liquigas rider Daniele Bennati. Now used by Sagan, the frame size features a 54cm seat tube with a relatively long 58cm top tube.

BikeRadar test rode the Cannondale SuperSix EVO last year, and came away generally impressed by its light weight and smooth ride.

The claimed frame weight of 695g is impressively light. In fact, Cannondale love to point out that production bikes are “illegally light”. Team liaison Rory Mason was quick to point out the custom solid steel spindle used on Sagan’s bike to bring it up to the UCI’s minimum weight of 6.8kg (14.99lb).

Steel is real. here, sagan has a 400g steel spindle to make his total bike weight race legal. also, his sram red derailleur has a sram force steel cage branded red: steel is real. here, sagan has a 400g steel spindle to make his total bike weight race legal. also, his sram red derailleur has a sram force steel cage branded red

Can you spot the steel?

“Last year we added the weight inside the seat tube,” Mason said. “But some riders – Ivan Basso, in particular – felt that the bike’s handling was affected by having the extra weight that high in the bike, so we moved it down.”

Aside from the Cannondale SL Hollowgram crankset, Sagan’s bike is completely spec’ed with SRAM Red 2012. Well, almost completely. The front derailleur is ‘old’ SRAM Red, with a SRAM Force steel cage marked SRAM Red. The SRAM Red cages are titanium, and some riders and mechanics prefer the feel of steel for shifting. (The 2012 Red front derailleur features an aluminum outer cage and a steel inner cage.)

This bike is Sagan's second race bike. His first bike – which he won on twice in California – is identical except that it also has an SRM power meter, which provides information for the rider and coach, and more heft for the UCI.

To keep things tidy, Sagan has clear stickers on his crank arms to avoid scuff marks from his shoes. After all, one must keep things looking good when the bike is coming first across the line so often.

Complete bike specifications

Frame: Cannondale EVO, custom geometry

Headset: SuperSix EVO, 1-1/4in lower bearing, 1-1/8in upper

Stem: FSA SL-K 120mm

Handlebar: FSA Traditional Bend Alloy Energy, 42cm (c-c)

Front brake: SRAM 2012 Red

Rear brake: SRAM 2012 Red

Front derailleur: SRAM Red (not 2012 Red) with a Force steel cage

Rear derailleur: SRAM 2012 Red

Shift/brake levers: SRAM 2012 Red

Cassette: SRAM XG 1090 11-23

Chain: SRAM 2012 Red

Crankset: Cannondale SL Hollowgram with custom solid-steel spindle, 53/39t (note: his race bike also has an SRM power meter)

Bottom bracket: Cannondale

Pedals: Speedplay Zero Team Edition

Wheelset: Mavic Cosmic Carbone Ultimate

Front tire: Mavic Yksion GripLink tubular 22mm

Rear tire: Mavic Yksion GripLink tubular 22mm

Seatpost: FSA K-Force

Saddle: Fi'zi:k Aliante

Bottle cages: Elite Pase Custom Carbon (2)

Computer: SRM (not shown)

Critical measurements

Rider's height: 1.84m (6ft)

Rider's weight: 73kg (160lb)

Saddle height, from BB (c-t): 75cm

Saddle setback: 95mm

Seat tube length, c-t: 54cm

Top tube length: 58cm (horizontal)

.-.-.-.-.-.-.-.-.-.-.-.

SINGLE-MINDED PURSUIT

Driven by a cutting-edge, single-ring carbon crank and seamless component integration, SRAM 1X drivetrain delivers flawless chain management and faster, more precise shifting. But the relationship between XX1 components goes far beyond fitment. From the X-HORIZON™ rear derailleur with TYPE 2 technology to the super wide range 11-speed 10-42T cassette, each component is designed to function synergistically with the others, achieving what no other 1X drivetrain has before. Filmed and edited by Victor Lucas.

.-.-.-.-.-.-.-.-.-.-.

New SRAM XX1 Prototype groupset: sneak peek

James Huang managed to get some shots of the long rumored new SRAM groupset whilst touring the factory in Germany. The groupset is a new 11 speed system - SRAM XX1 and the video here shows the prototypes.

SRAM XX1 prototype spotted - this one goes to 11

By James Huang, technical editor, in Germany | Friday, May 25, 2012 12.00pm

The XX1 rear derailleur will feature the new Type 2 pulley cage clutch internals to help control chain movement (James Huang/Future Publishing)

We’d long heard rumblings of a new 11-speed mountain bike group coming from SRAM. We expected it to be an updated XX with a wider range that more closely replicated a conventional triple. Instead, SRAM have developed a progressive, dedicated, single-ring 11-speed group called XX1. The company hope it will change mainstream thinking in terms of mountain bike drivetrains.

We happened to score an in-depth look at the prototype during our recent visit to SRAM’s European headquarters, where we got a lengthy sit-down with drivetrain product manager Chris Hilton. We also got to pedal the bits around a little, too.

What is XX1?

SRAM aren’t pitching XX1 as having 11 speeds. Instead, they’re describing it as a 1x drivetrain that just happens to have 11 cogs out back. The heart of the XX1 concept is its ultra-wide, 10-42T cassette, which provides a generous 420 percent range. That still falls short of the XX’s rough 470 percent but it’s a big improvement over current 1x10 drivetrains that many riders already run. In essence, the XX1 cassette adds a gear on either end of a current XX cassette while retaining reasonable jumps in between.

“We’re not trying to start an 11-speed war,” Hilton says. “A 1x11 war? Fine, but a 2x11 war isn’t beneficial to anybody.”

SRAM also don’t intend for the XX1 to replace current 2x10 groups. Instead, they’re aiming it at trail and enduro riders who are often already strong enough to power a single-ring drivetrain. The target group often also place a major emphasis on chain retention and impact protection with dedicated guides and bashguards.

Nonetheless, SRAM are fully expecting a smaller faction of forward-thinking cross-country riders to jump on board as well. As well as being simpler and more secure than the XX, the XX1 is also lighter. Target production groups are 200-300g relative to the ultra-light XX.

“Almost all of that is from omission, not from anything getting lighter,” Hilton tells BikeRadar. So there shouldn’t be any drop in overall durability, either.

Final pricing is still to be determined but SRAM plan to launch the XX1 later this summer.

Video: SRAM's prototype XX1 drivetrain

New cassette, new freehub body

The XX1 cassette construction is very similar to that of XX, mostly machined from a single block of steel to form a hollow, domed structure. That dome is then capped with an aluminum innermost cog – in this case, one that’s much more dished than the one on XX. This also transfers all the drive torque to the splined freehub body. Instead of having the smallest cog as a separate bit, XX1’s 10-tooth cog is now integrated into the rest of the steel structure.

Squeezing on a 10-tooth cog required some doing, as it’s too small in diameter to fit on a conventional freehub body. So, SRAM created a new ‘XD’ driver body that’s essentially a slight modification of what’s currently in use. The end where a conventional lockring would normally thread into is lopped off. And almost all the splines on the outside of the body are shaved smooth to leave a mostly bare cylinder.

The new 'XD' freehub body is essentially just a modification on a standard SRAM/Shimano 9/10-speed driver. The threaded end is cut off as are most of the splines, then new threads are added at the base of the body to secure the locking tube. Otherwise, the body is unchanged so it rides on the same bearings, bearing locations, and axles

A Delrin-lined aluminum locking ‘tube’ replaces the conventional lockring. The ‘tube’ snaps into the inside of the 10-tooth cog but is otherwise free to rotate. Threads at the inner edge then match up to new threads added just outboard of the remaining freehub body splines. The Delrin lining is sized to provide a light press-fit on the freehub cylinder. When it’s all secured, the locking tube keeps everything firmly concentric on the freehub body, with no chance of cogs digging into its surface. It’s not very different to how a non-driveside SRAM GXP crank arm attaches to a bottom bracket spindle.

Because all the freehub body modifications are restricted to the exterior, an XD body can be adapted to current hub designs with no changes to things like axles, bearings and spoke flange spacings.

The XX1 cassette fits onto a modified XD cassette body

For now, wheels will be available from SRAM and DT Swiss only for sure although recent imagery released by SRAM suggests Mavic is on board as well. Hub spacing will remain unchanged at 135mm or 142mm. Licenses to other makes are under discussion, but given the prevalence of DT Swiss drivers in other companies’ wheels that should open things up to the likes of Specialized, Reynolds, Enve Composites, and others right away.

XX1’s 11-speed cog spacing will be unique to the group, however, and isn’t shared with 11-speed offerings from Shimano (more on that soon) or Campagnolo. Of course, there’s a dedicated 11-speed chain as well, with a slightly narrower external width. Inner plate spacing and roller width are unchanged from SRAM’s 10-speed chains, though, so wear supposedly isn’t adversely affected.

Weight weenies shouldn't be concerned about the XX1 cassette's huge size, either. According to Hilton, "at present, the 10-42T 11-speed cassette is lighter than an XTR 11-36T 10-speed."

Straight P derailleurs

The XX1’s rear derailleur will signal a radical departure from current designs. With a conventional slant parallelogram the derailleur body simultaneously moves the cage in and out as well as up and down. But the XX1 will use a so-called “straight P” layout where the body only moves along the horizontal plane. It’s an idea Hilton admits has been floating around within SRAM for the past eight years but is only now seeing the light of day with the rise of 1x drivetrains.

Hilton acknowledges that a straight parallelogram is counterintuitive. One would assume that the derailleur body should follow the contours of the cassette, but the XX1 cassette’s extreme gear range and tighter cog spacing necessitated a change in thinking.

“Originally, the first prototype of this was built for a downhill bike,” Hilton says. “We built it because when bikes hit bumps, the derailleur absorbs the shock of that chain. So you hit a bump today and you’ve got your chain mass and your derailleur mass. It can actually activate the parallelogram and cause ghost shifting. If you add a clutch to that and you’ve really significantly stopped that force, you’ve actually added to the potential for ghost shifting. We’ve compensated for that [in current Type 2 rear derailleurs] by not decreasing our spring tension in derailleurs.”

Because XX1 doesn’t rely on a slant parallelogram to control chain gap, the upper pulley is now hugely offset from the lower derailleur body knuckle. As the chain shifts across the range, more or less chain is wrapped around the cassette, pulling the cage fore and aft and the upper pulley up and down.

XX1 will only be offered with a single 10-42T cassette ratio, so that upper pulley pivot offset could be precisely calculated to keep chain gap consistent across the entire range.

“The chain gap is exactly the same in every single cog no matter what cog you’re in, even if you were to change the cassette, because it’s driven by the amount of free chain length,” explains Hilton.

The XX1’s “straight P” design also means it will only work with a single-ring crank. Likewise, suspension designs with lots of chain stay growth could be problematic.

Naturally, the XX1 will feature SRAM's new Type 2 roller bearing clutch to squelch excess pulley cage movement on bumpy terrain. Other details include an integrated cable pulley at the rear of the derailleur, just like on Avid’s long-defunct Rollamajig, to decrease cable friction. We expect production units to be built with cold-forged parallelogram plates and a carbon-fiber pulley cage.

The 1x11 concept doesn’t require a huge re-engineering of shifters. Therefore, XX1 models will essentially be the same as current trigger and Grip Shift offerings, albeit with different badging, an extra click and specific internal spacing.

No chain guide required?

XX1 was conceived as a single-ring drivetrain, allowing engineers to rethink the chainrings as well. Conventional 2x or 3x chainrings are designed with elaborately shaped teeth to improve shift performance but this also affects ability to retain the chain on bumpy terrain.

“As we make chainrings shift faster and smoother, we’re taking material away, making them more expensive, limiting their lifespan and potentially affecting chain retention capability,” says Hilton. “There's no question that making a chain shift makes a chain fall off.”

As a result, XX1’s chainring teeth are unusually tall and quite squared-off, similar to those found on dedicated singlespeed rings. However, they’re also built with alternating tooth thicknesses that are syncronized with the gaps in the chain – slightly narrower to fit between inner chain plates, and wider to take advantage of the extra space between outer chain plates.

Combined with XX1’s improved chainline, Hilton claims this improves chain retention to the point that you won’t need any sort of guide in most applications, while also slowing down wear and reducing drivetrain noise. Hilton admits that aggressive trail and enduro riders might still choose to run some sort of minimal upper guide, if only for peace of mind.

“I like to say that chain retention is sort of like birth control – there are various levels of safety,” he quipped. “You could choose to use a full-on X0 DH guide with bash protection and a lower roller in addition to this whole system but that would be like abstinence."

The XX1 drivetrain fits in well with the 'new school' of trail bike kit, which includes wide bars and short stems

The synchronized design of the chainring teeth will limit the XX1’s chainring choices to even numbers. But the overall range is admirably broad – all the way from 28-38T. That variation will require a dedicated bolt circle diameter, but the spider will be shaped so that users won’t have to remove the cranks to swap rings. The production crank will feature hollow carbon-fiber arms and be offered in both narrow and wide stance widths (we’re guessing 156mm and 166mm, as for current XX cranks).

1x11 drivetrains: the bonuses

Why go to all this trouble just to eliminate a chainring, though? Don’t current 2x10 systems already work well enough? That all depends on who you ask. It’s true that modern two-ring drivetrains work well. But they still can’t match the security of single-ring setups, which are increasingly finding favor in the mainstream marketplace, especially with more aggressive riders. If you need proof of that, just note the explosion of two-ring chainguide models in recent years.

Moreover, single-ring drivetrains are simpler and lighter, as well as less confusing to newer riders. Hilton doesn’t refute the idea of eventually bringing the 1x11 concept to much lower price points and XX1’s gearing range sounds generous enough to be useful for a wide swath of riders.

“As long as you choose your range properly, this type of system is applicable to a majority of people,” Hilton says. “It’s not intended to replace 2x10. Some people need a bigger range, and that’s fine – we still have 2x10. But if you’re Ross Schnell or various other people, this is a radically improved 1x10.”

Hilton also points to the difficulties an OEM company can face in terms of getting front derailleurs to play nicely with the huge range of rear suspension designs.

“Front derailleurs are limiting because there are so many choices,” Hilton says. “It’s limiting because of where you can move the wheel to, where the suspension pivots are placed, where the cable routing comes from – all those things are limitations to a drivetrain. Front derailleurs are one of the most expensive engineering and tooling costs on a bicycle, yet it’s the first place manufacturers go to cut money.”

So why not use a 2x11 setup? Combined with that 10-42T cassette, such a drivetrain could easily replicate the full range of a traditional triple but with the advantages of a double.

“2x11 is certainly feasible – it’s not impossible,” Hilton says, though he also adds that the cassette’s added width presents problems with chainline if more than one chainring is used. “11-speed is a by-product of wanting to make a wider-range cassette without funky steps in there. We want to sell it as a 1x drivetrain solution that just happens to have 11 gears. The eleventh gear becomes problematic because the overall spacing is now wider.”

Could the XX1 concept be further expanded with a revamped HammerSchmidt or high-performance, internally geared setup, though? Hilton doesn’t rule out that possibility but says it’s not imminent.

Either way, XX1 sounds awfully appealing on paper. And after a brief test ride inside SRAM’s Schweinfurt facility, in Germany, it certainly seems to work. We’ve been promised parts for testing in the near future so we’ll know for sure soon.

http://www.bikeradar.com/mtb/news/article/sram-xx1-prototype-spotted-this-one-goes-to-11-34098/